Publications: Internal Task note
EURISOL DS report on task 11.4: Comprehensive investigation of fragmentation reactions
23/03/2009 -Task : TASK 11
Author(s) :J. Benlliure, USC
Delverable D4
Delverable D4
GSI fission model results
29/01/2009 -Task : TASK 11
Author(s) :A. Kelic, M.V. Ricciardi, K.-H. Schmidt
Milestone M3.2
Milestone M3.2
JYFL fission model results
29/01/2009 -Task : TASK 11
Author(s) :V. Rubchenya
Milestone M3.1
Milestone M3.1
Task 11 Beam-intensity data base
12/12/2008 -Task : TASK 11
Author(s) :Wojtek Gawlikowicz, Aleksandra Kelic, Strahinja Lukic, Karl-Heinz Schmidt
Information necessary to calculate intensities of exotic beams - production cross section, primary and secondary yields, efficiencies, are given in the web-based data base. Link to the data base: http://www.gsi.de/eurisol-t11/database/eurisol_database.php
Information necessary to calculate intensities of exotic beams - production cross section, primary and secondary yields, efficiencies, are given in the web-based data base. Link to the data base: http://www.gsi.de/eurisol-t11/database/eurisol_database.php
Optimization of in-target yields for RIB production - Part I: Direct yields
12/12/2008 -Task : TASK 11
Author(s) :S. Chabod, N. Thiokkiere, J.-C. David, V. Blideanu, D. Dore, D. Ene, B. Rapp, D. Ridikas
In-target yields for different configurations of thick direct targets.
In-target yields for different configurations of thick direct targets.
D5 - Neutron and proton induced reactions up to Fermi energy- Report on cross section
12/12/2008 -Task : TASK 11
Author(s) :Jyvaskyla
Summary of the obtained fission yields in neutron and proton induced reactions.
Summary of the obtained fission yields in neutron and proton induced reactions.
D3 - Fission models - Validation and improvement of codes report
12/12/2008 -Task : TASK 11
Author(s) :GSI and Jyvaskyla
Neutron-rich nuclei in the mid-mass region are best produced by fission of a heavy neutron-rich nucleus like 238U. The fission characteristics sensitively depend on the entrance channel, e.g. kind and energy of projectile. Fission is such a complex process that calculations of the nuclide production in fission must at least partly rely on empirical information. Semi-empirical models, however, have only a limited predictive power, especially far from regions covered by experiment. Therefore the benchmarking of fission models against available data and their improvement was a major task.
Neutron-rich nuclei in the mid-mass region are best produced by fission of a heavy neutron-rich nucleus like 238U. The fission characteristics sensitively depend on the entrance channel, e.g. kind and energy of projectile. Fission is such a complex process that calculations of the nuclide production in fission must at least partly rely on empirical information. Semi-empirical models, however, have only a limited predictive power, especially far from regions covered by experiment. Therefore the benchmarking of fission models against available data and their improvement was a major task.
Benchmark calculations on residue production within the EURISOL DS project; Part II: thick targets
17/09/2007 -Task : TASK 11
Author(s) :J.-C. David, V. Blideanu, A. Boudard, D. Doré, S. Leray, B. Rapp, D. Ridikas, N. Thiollière
Benchmark calculations on residue production using MCNPX 2.5.0. Calculations were compared to mass-distribution data for 5 different elements measured at ISOLDE, and to specific activities of 28 radionuclides in different places along the thick target measured in Dubna.
Benchmark calculations on residue production using MCNPX 2.5.0. Calculations were compared to mass-distribution data for 5 different elements measured at ISOLDE, and to specific activities of 28 radionuclides in different places along the thick target measured in Dubna.
Benchmark calculations on residue production within the EURISOL DS project; Part I: thin targets
01/03/2007 -Task : TASK 11
Author(s) :J.C. David, V. Blideanu, A. Boudard, D. Doré, S. Leray, B. Rapp, D. Ridikas, N. Thiollière
Report on benchmark calculations on residue production in thin targets. Calculations were performed using MCNPX 2.5.0 coupled to a selection of reaction models. The results were compared to nuclide production cross-sections measured in GSI in inverse kinematics
Report on benchmark calculations on residue production in thin targets. Calculations were performed using MCNPX 2.5.0 coupled to a selection of reaction models. The results were compared to nuclide production cross-sections measured in GSI in inverse kinematics
M2.1 – Preparation and execution of the experiment “fragmentation of 132Sn”
16/02/2007 -Task : TASK 11
Author(s) :K.-H. Schmidt
Note on the achievement of the milestone M2.1
Note on the achievement of the milestone M2.1
Publications from 11 to 20 of 25
