|
|
A reliable procedure will be provided for calculating beam intensities in different scenarios of the planned EURISOL facility using adequate nuclear-reaction and transport codes, which are validated and improved using data from innovative experimental approaches.
GSI Link about Task 11
|
Internal Task note
Aspects of secondary reactions
CEA Saclay
Task 11, deliverable D6
EURISOL DS report on task 11.4: Comprehensive investigation of fragmentation reactions
J. Benlliure, USC
Delverable D4
Task 11 Beam-intensity data base
Wojtek Gawlikowicz, Aleksandra Kelic, Strahinja Lukic, Karl-Heinz Schmidt
Information necessary to calculate intensities of exotic beams - production cross section, primary and secondary yields, efficiencies, are given in the web-based data base. Link to the data base:
http://www.gsi.de/eurisol-t11/database/eurisol_database.php
Optimization of in-target yields for RIB production - Part I: Direct yields
S. Chabod, N. Thiokkiere, J.-C. David, V. Blideanu, D. Dore, D. Ene, B. Rapp, D. Ridikas
In-target yields for different configurations of thick direct targets.
Benchmark calculations on residue production within the EURISOL DS project; Part II: thick targets
J.-C. David, V. Blideanu, A. Boudard, D. Doré, S. Leray, B. Rapp, D. Ridikas, N. Thiollière
Benchmark calculations on residue production using MCNPX 2.5.0. Calculations were compared to mass-distribution data for 5 different elements measured at ISOLDE, and to specific activities of 28 radionuclides in different places along the thick target measured in Dubna.
Benchmark calculations on residue production within the EURISOL DS project; Part I: thin targets
J.C. David, V. Blideanu, A. Boudard, D. Doré, S. Leray, B. Rapp, D. Ridikas, N. Thiollière
Report on benchmark calculations on residue production in thin targets. Calculations were performed using MCNPX 2.5.0 coupled to a selection of reaction models. The results were compared to nuclide production cross-sections measured in GSI in inverse kinematics
|
 |
|
